Panel Functions 113
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET TM4
Edition 1.2p
8.3.20. Transparent Code Adjustment
This function configures the transparent code. Using the transparent code enables you to
initiate the commands of the page description language IDOL by
printable
characters.
The transparent code pre-setting is 2625. These are the ASCII character codes
(hexadecimal) for the characters
(ref. IDOL Programming Manual).
Panel display
Notes
[Online ]
Turn the printer OFF LINE with this key.
[Menu Level 1 ]
. . .
Press the
or
key until [Configuration
]
is displayed.
[Configuration ]
Press this key. The Configuration menu is selected.
[Interface ]
. . .
Press the
or
key until
[Transparent
Code
] is displayed.
[Transparent Code]
Press this key. The Transparent Code menu is
selected.
[Digit4 2625 ]
The hexadecimal number for &
% is preset.
. . .
Pressing the
or
key changes the value
of the current digit. (Digit 4 = left position, in this
example: 2). Pressing the
key moves you to
the next digit (the
key moves you back, if
need be).
[Digit1 2626 ]
2626 is selected as transparent code. From now on
use the characters
&
&
before programming the IDOL
commands.
[Save as Setup? ]
In addition this new value can be saved as setup
value (using the
key), before the printer is
turned ON LINE again. After this decision turn the
printer ON LINE again: Press the
key
longer
than 2 seconds.
[Online ]
