Handling of Consumables 23
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET TM4
Edition 1.2p
4. Handling of Consumables
Pay attention to the following safety instructions and the instructions
listed in section 1.4, too!
Safety instructions:
- Set the DIPswitch located on the DC/DC converter PCB to the
nominal voltage supplied by the vehicle’s electric system and
always use a suitabele fuse (details are described in chapter 5).
- The cutter (optional device of your printer) can cause injuries if the
printer is operated incorrectly.
- There is a danger of fingers, hair, clothing, jewellery etc. being
drawn into the machine in the vicinity of the material transport unit.
- Be careful when operating equipment with opened cover hoods
(setting-up work or service). Rotating parts can cause injury, and it
is possible for hair, clothing, jewellery, etc. to be caught in the
machinery.
- Print material should only be inserted and changed by specially
instructed personnel.
For thermal direct printing it is not allowed to load a ribbon to avoid
damaging the printhead. Make sure your settings using the
integrated website/ IP-Admin Panel (see chapter 5 to 8) fit to the
printer implementation (ribbon inserted /not inserted).
Ribbon and material should only be inserted/exchanged by specially
instructed personnel.
