98 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET TM4
Edition 1.2p
8.3.7. Configuration of Text Margins
This function sets text margins. Margins are expressed in dots at the
concerning edge of the paper.
Panel display
Notes
[Online ]
Turn the printer OFF LINE with this key.
[Menu Level 1 ]
. . .
Press the
or
key until [Page
Menu
] is
displayed.
[Page Menu ]
Press this key. This selects the page menu.
[Font Number ]
. . .
Press the
or
key until [Margin
] is
displayed.
[Margin ]
Press this key. This selects the Margin configuration
menu.
[Left ]
. . .
Press the
or
key until the desired margin
is displayed.
[from Right ]
Press this key if you want to configure the right margin.
[Digit4 0081 ]
The currently set value is displayed.
. . .
Pressing the
or
key changes the value of
the current digit. (Digit 4 = left position, in this example:
0). Pressing the
key moves you to the next
position (the
key moves you back, if need be).
[Digit1 0087 ]
The right margin is changed to 87 dot.
[Save as Setup? ]
[Online ]
In addition this new value can be saved as setup value
(using the
key), before the printer is turned ON
LINE again. After this decision turn the printer ON LINE
again: Press the
key
longer than 2 seconds.
