28 Handling of Consumables
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET TM4
Edition 1.2p
Fig. 4.2.1.c Target position for the ribbon rewind spindle
14.
Wind the ribbon rewind spindle 3 to 5 rotations in the
shown direction (see the following figure) to tauten the
ribbon.
Fig. 4.2.1.d Tautening the ribbon by windingthe ribbon rewind spindle
15.
Check that the ribbon has no folds and is running straight.
If necessary, tauten the ribbon a little bit more by further
winding of the ribbon rewind spindle. Finally the ribbon has
to be firmly attached to the ribbon sleeve.
Ribbon rewind
spindle
