132 Troubleshooting
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET TM4
Edition 1.2p
10.1. Printer Error Messages
Panel display
Remedies
[Load Paper
]
or
[Paper End ]
- insert a printmedia (paper, roll-fed media e.g.)
- make sure the media has been
loaded correctly
(compare section 4.3)
- clean the sensors
(compare section 8.3.2)
[Foil Error! ]
The thermal transfer print mode is selected.
A printer ribbon is needed.
- insert a ribbon
- make sure the ribbon has been
loaded correctly
(compare section 4.2)
- Correct the print process setting, if you don’t
want to use a ribbon.
(compare section 8.3.3)
[Head open! ]
The printhead assembly is not firmly in place.
Re-open the printhead assembly and make sure
it closes tightly:
- swivel the printhead mechanism downward
and use both hands to push down gently to
lock.
