MicroNet PlatinumRAID Ultra320 Owner'S Manual Download

Page: 71 / 73

PlatinumRAID Owner’s Manual

System Architecture (Ultra320 Models)

Intel 80219 400MHz XScale I/O processor

64bit, 133MHz PCI-X Interconnect

128MB on-board DDR200 SDRAM with ECC protection

Marvell SATA ll drive channel controller

NVRAM for RAID configuration & transaction log

Write-through or write-back cache support

Firmware in Flash ROM for easy upgrades

Disk Bus Interface (Ultra320 Models)

5 hot swappable, SATA2-NCQ, 7200 RPM Disk Drives

5 discrete SATA2 drive channels

48-bit LBA support allows disk exceeding 137GB

Staggered Spin-Up of Individual Disk to minimize Power-on Surge

RAID Features

RAID level 0, 1 (0+1), 3, 5 with single disk passthrough

Multiple RAID selection

Array roaming

Online RAID level/ stripe size migration

Online capacity expansion and RAID level migration simultaneously

Automatically and transparently rebuilds hot spare drives

Hot swappable disk drives

Instant availability and background initialization

Automatic drive insertion / removal detection and rebuilding

Field-upgradeable firmware in flash ROM

Firmware-embedded management via Front Panel, RS232 Terminal session, telnet

Session, and web browser-based RAID management

Ultra320 SCSI Host Bus Interface (Ultra320 Models)

Ultra 320-Wide LVD SCSI; Transfer rate up to 320MB/sec

QAS Enabled

Tagged Command Queuing

Concurrent I/O commands

16 byte CDB support

Monitors / Indicators

LCD Display and Control Panel for setup, alarm mute and configuration

5 drive LED indicators and 3 environment LED indicators

Environment and drive failure indication through LCD, LED and alarm buzzer

Appendix E: Product Specifications

E-Product Specifications

Summary of Contents for PlatinumRAID Ultra320










































































Search results

Summary of Contents for PlatinumRAID Ultra320

Reviews:

Related manuals for PlatinumRAID Ultra320

Brands by name

Popular brands

MicroNet PlatinumRAID Ultra320, Owner'S Manual

Search results

Summary of Contents for PlatinumRAID Ultra320

Reviews:

Related manuals for PlatinumRAID Ultra320

Brands by name

Popular brands