PlatinumRAID Owner’s Manual
4. Physical Drive Functions (D)
Choose this option from the Main Menu
to select a physical disk and to perform
the operations listed below. To enter a
Physical Drive Functions, press
ENT
to
enter the main menu. Scroll to select
the Physical Drive Functions option
and then press
ENT
to enter further
submenus. All physical drive submenus
will be displayed.
4.1 Display Drive Information
Select the View Drive Information
option and press
ENT
. Select the drive
to display. The drive information screen
shows the Model Name, Serial Number,
Firmware Rev., Device Capacity, Device
PIO Mode, Current UDMA, Supported
UDMA, and Device State.
4.2 Create a Pass-Through Disk
A Pass-through disk can be defined to
dedicate a single disk as not controlled
by the RAID subsystem firmware and
thus cannot be a part of a RAID set.
Instead, the disk is available to the
operating system as an individual disk.
To create a Pass-Through disk, select
the Create Pass-Through Disk option and
press
ENT
. Select the drive IDE number
to create, and the drive attributes will be
displayed including the SCSI or FireWire
specific settings and Cache Mode. Select
attribute to modify and then press
ENT
.
Select attribute value and press the
ENT
to
accept the selection value.
4.3 Modify Pass-Through Disk
To modify Pass-Through Disk attributes, scroll
to choose the
“Modify Pass-Through Drive”
option, and then press
ENT
. The Select Drive
Function menu will show all Pass-Through
Drive number items. Select the Pass-Through
Disk to modify and press
ENT
. The attributes
screen shows the Pass-Through Disk setting
value currently configured. Select the desired
5-RAID Controls-LCD/Terminal
6
7
$
7E5
.%$" 3ek`UZda`age0
IdSbe 3dag`V
.7`ST^WV 6[eST^WV0
IdSbe3dag`V
.")0
IdSbe 3dag`V
."#'0
IdSbe 3dag`V
E[`Y^WE5E;5ZS``W^Egbbadf
6a@af5ZS`YW
.Id[fW4SU]- Id[fWFZdagYZ0
IdSbe 3dag`V
?aVW^
EWd[S^ @g_TWd
8[d_iSdW DWh
6Wh[UW 5SbSU[fk
6Wh[UW B;A ?aVW
5gddW`f G6?3
EgbbadfWV G6?3
6Wh[UW EfSfW
E5E; :aef
E5E; ;6
E5E; >G@
5SUZW ?aVW^
FSYYWV CgWg[`Y
E5E; Ek`U DSfW
BZke[US^ 6d[hW
8g`Uf[a`e
6[eb^Sk 6d[hW
;`Xad_Sf[a`
5dWSfW BSee
FZdagYZ 6[e]
EW^WUf 6d[hW
;67 5ZS``W^ j
EW^WUf 6d[hW
;67 5ZS``W^ j
5ZY FSYYWV CgWg[`Y
7`ST^WV
5ZY Ek`U DSfW
jjj?4!eWU
7@F , Fa 5dWSfW
7E5 , Fa 3Tadf
5ZY E5E; 5Z
5ZS``W^ j
5ZY E5E; ;6
E5E; ;6 j
5ZY 5SUZW _aVW
Id[fW4SU]
5ZY E5E; >G@
E5E; >G@ j
2
<Selected, Unselected>
Wraps Around
ESC
<160, ..Asynchronous>
Wraps Around
<Enabled, Disabled>
Wraps Around
<0-7>
Wraps Around
<0-15>
Wraps Around
ARC-6010 only
Supports one SCSI Channel
<Write-Back; Write-Through>
Wraps Around
SCSI Host
SCSI ID
SCSI LUN
Cache Model
Tagged Queuing
SCSI Sync Rate
Delete Pass
Through Disk
Select Drive
IDE Channel x
ENT : To Delete
ESC : To Abort
Identify The
Selected Device
Select Drive
IDE Channel x
LED Flash Method
Flash Selected
Are You Sure ?
ENT :Yes, ESC :No
Identify Dev.
Check Device LED
ENT : To Modify
ESC : To Abort
Chg. Sync Rate
* xxxMB/sec
Chg. Tagged Queuing
* Enabled
Modify Pass
Through Disk
Select Drive
IDE Channel x
Chg. SCSI Ch.
* Channel x
Chg. SCSI ID
* SCSI ID x
Chg. Cache mode
*Write-Back
Chg. SCSI LUN
* SCSI LUN x
