PlatinumRAID Owner’s Manual
11
Connecting the PlatinumRAID
Connecting the PlatinumRAID requires a host with a SCSI host bus connector, and an available
power socket. To use the optional management and configuration interfaces, the following
may also be required:
• To use the built in Ethernet remote management will require an available ethernet jack to
your hub or switch.
• To use the VT100 terminal, a 9pin (DB9) serial port will be required on your host. If the
host does not have an available serial port, a USB to serial adapter may be used.
Attach the cables as illustrated:
