Micromeritics ASAP 2460 Operator'S Manual Download Page 293

Page: 293 / 468

ASAP 2460 Operator’s Manual

Appendix B

246-42800-01 - Dec 2013

B-13

2526-

Controller download was not successful.

2527-

Controller CRC error on boot block.

2528-

Controller DRAM error.

2529-

Controller Com1: error.

2530-

Controller Com2: error.

2531-

Controller debug port error.

Cause:

An internal processing and/or hardware error has occurred.

Action:

Contact your service representative if you continue to receive this error
message.

2532-

The instrument contains a different software version. Do you want to reset it?

Cause:

The application has discovered a different version of software operat-
ing in the analyzer.

Action:

If there are no analyzers other than the ASAP 2460 connected to the
computer, select

Yes

and allow the updated software to load.

2533-

Analyzer initialization failed.

Cause:

An internal processing and/or hardware error has occurred.

Action:

Contact your service representative if you continue to receive this error
message.

2542-

The file (filename) could not be written. Check that the directory permissions

are correct.

Cause:

The person logged into the computer does not have write access to the
program and/or data directory.

Action:

Have the system administrator of the computer set up proper privileges
for all users.

2548-

System status 1 or 2.

Cause:

A hardware error has occurred.

Action:

Contact your service representative.

Summary of Contents for ASAP 2460





















































































































































































































































































































































































































































































Search results

Summary of Contents for ASAP 2460

Reviews:

Related manuals for ASAP 2460

Brands by name

Popular brands

Micromeritics ASAP 2460, Operator'S Manual

Search results

Summary of Contents for ASAP 2460

Reviews:

Related manuals for ASAP 2460

Brands by name

Popular brands