Micromeritics ASAP 2460 Operator'S Manual Download Page 295

Page: 295 / 468

ASAP 2460 Operator’s Manual

Appendix B

246-42800-01 - Dec 2013

B-15

2558-

The instrument is busy.

Cause:

An instrument is busy. The requested operation cannot be executed.

Action:

The instrument is busy. The requested operation cannot be done at this
time.

Action:

Wait until the instrument is idle and try the operation again.

The requested operation cannot be executed.

2559-

SPC directory (name) does not exist.

Cause:

Files were selected for SPC reporting from a directory which no longer
exists.

Action:

If the directory was deleted, renamed, or moved in error, restore the
directory.

Action:

Select a different set of files for SPC reporting.

2560-

File (filename) cannot be created or opened. It has an unrecognized extension.

Cause:

A file name with an extension unrecognizable by the software was
typed into a file selector.

Action:

Type in a different file name. The extensions used by the software are:



Action:

If the named directory was accidentally renamed or move, restore the
directory.

Action:

If the file reference is incorrect, remove the file reference.

SMP - Sample File

ANC - Analysis Conditions

DEG - Degas Conditions

ADP - Adsorptive Properties

RPO - Report Options

Summary of Contents for ASAP 2460





















































































































































































































































































































































































































































































Search results

Summary of Contents for ASAP 2460

Reviews:

Related manuals for ASAP 2460

Brands by name

Popular brands

Micromeritics ASAP 2460, Operator'S Manual

Search results

Summary of Contents for ASAP 2460

Reviews:

Related manuals for ASAP 2460

Brands by name

Popular brands