micro
HAM ©
2016
All rights reserved
PRESET MENU
For easy switching among applications, Router supports up to 12 user definable
Presets
. Different configurations can be stored in these presets and recalled
almost instantly simply by clicking on the preset button.
Each preset contains the settings for all devices connected to, and controlled by,
Router. For example, if Router controls a Station Master Deluxe, microKEYER II,
and a USB Interface II, each preset remembers the settings for
ALL
devices
including the assignment of COM ports and the contents of all sub-tabs except the
FSK and CW Messages tabs.
NOTE:
Presets are not available until they have been saved by the user using
Preset | Save as.
There are three ways to apply a preset once it is created:
1.
Click on
Preset
and select it from the pull-down menu.
2.
Click on a preset button. To have buttons visible in Router,
Preset | Show Buttons
must be checked.
When the settings from a preset are applied, a green light located in the preset button is lit. This green
light is on ONLY when all settings in Router are same as those stored in the preset.
3.
By right clicking on the system tray icon when the Router is minimized.
The presets and the current router configuration are stored to the registry when
Router is closed and recalled when Router is loaded.
Save as
- Saves the current Router settings to a preset for future use.
Rename
- Allows renaming of an existing preset.
Delete
- Delete chosen preset.
Show buttons
- When checked, Router shows the preset buttons.
22
