micro
HAM ©
2016
All rights reserved
CONFIGURATION MANAGEMENT TERMS
In order to make a valid configuration there are several precautions which have to be observed.
•
Layout and document your RF installation. It is vital to start with a diagram showing the entire system,
including every component - transceivers, antennas, switches, amplifiers, filters, rotators etc. Station
Master Deluxe must know every device in the system in order to control everything correctly and safely.
In this manual, components of the RF setup are called “
RF Boxes
.”
•
Give every RF BOX a short but easily understood name. This name will be included in many of SMD
reports.
•
Add the controls for every RF BOX. Document the number and function of the control wires, the type of
any RELAY control unit - ANTenna switching, FReQuency based switching, SEQuenced switching,
MANual, - the type of ROTATOR modules, and DATA modules.
•
Define
addresses
and
units
for the uLINK modules and verify the design.
13
