micro
HAM ©
2016
All rights reserved
Configuring
micro
HAM USB Device Router
The
micro
HAM USB Device Router (Router) program provides a Windows compatible
configuration tool
for
micro
HAM USB Devices
(
Station Master Deluxe as well as microKEYER II, DIGI KEYER,
micro
KEYER, CW
Keyer and USB Interfaces
)
and
software interface
to other Windows applications (logging software, digital mode
software, etc.). The software interface is provided as
Virtual Serial Ports
.
In order to configure and use Station Master Deluxe with Windows compatible application programs, you must
be running Router and have turned on Station Master Deluxe Router is then configured as required by the
application (logging, control or digital mode) software.
Station Master
Deluxe Status
When the USB driver is installed correctly and Station Master Deluxe
is turned on Router will show a device tab with a
GREEN
beside
the device name.
When Router shows a
YELLOW
“
X
” instead of a green
, it means
the USB driver is correctly installed but Router can not communicate
with the controller in Station Master Deluxe. This is usually because
SMD is not turned on.
When Router shows a
RED
“
X
” instead of a green
, it means the
device is disconnected and Router does not see the USB part of
Station Master Deluxe. This happens when the USB cable is
unplugged or the USB driver is not correctly installed.
19
