micro
HAM ©
2016
All rights reserved
KEYBOARD TAB
The Keyboard Tab controls the operation of a PS/2 keyboard or numeric keypad connected to the PS/2 jack. It is
also possible to define control functions for the numeric keypad.
The PS/2 and FH-2 sub tabs allow assigning
control functions to PS/2 and FH-2 style keypads.
When a PS/2 keyboard is attached to Station
Master Deluxe, all keys except those on numeric
keypad are forwarded to the attached keyer.
Checking
Forward numpad keys to keyer,
will
cause the numeric keypad keys on the keyboard
or all keys on a separate numeric keypad to be
forwarded to the keyer connected via iLink.
Default key assignments:
NumLock:
toggle to enable/disable TX SPLIT,
separate TX and RX antennas.
When split is enabled, NumLock
on the keypad will light on keypads
with a NumLock LED.
Decimal dot:
toggle to enable/disable RX SPLIT, separate RX and RX2 antennas.
/:
/ followed by three digits enters rotator target azimuth. To cancel entry press /.
+, -, Enter:
these keys have the same function as rotary encoder on SMD front panel. + is one step CW, - one
step CCW and Enter replaces an encoder push.
Keys 0-9 on numeric keypad, and additional
shift
functions, are user configurable. The * key is used as a shift
key. Individual keys can be configured to be forwarded to Keyer connected via iLink.
When using an FH-2 style keypad all keys are user configurable. FH-2 keys cannot be shifted.
The FH-2 keypad must be connected to the PS/2 jack of SMD using a special adapter. FH-2 can operate at the
same time as PS/2 keypad.
NOTE:
The FH-2 cannot control Station Master Deluxe and a transceiver at the same time. FH-2 can only be
connected to the Station Master Deluxe
or
the transceiver.
IMPORTANT:
The settings on this tab are recalled only when Station Master Deluxe is connected to
micro
HAM
Router. In order to function in stand alone mode, the settings must be saved to Station Master Deluxe as
power-up defaults using “Device | Store as Power-Up Settings.”
31
