micro
HAM ©
2016
All rights reserved
DEVICE CONFIGURATION TABS
There are five (5) tabs for configuring Station Master Deluxe Each tab controls part of Station Master's functions.
Except already explained tab for Configuration Management, any change is applied immediately.
•
Ports:
assign virtual ports to the Station Master Deluxe
for use by applications.
•
Keyboard:
configures operation of PS/2 keyboard or keypad.
•
Display:
configures operation of the LCD display.
•
System Settings:
configures power control and displays system power.
•
Configuration Management:
contains sub-tabs for configuring RF network, antenna selections,
antenna definitions, rotators, and their relationship.
PORTS TAB
Once the virtual ports have been created they must be associated with a specific function or device channel
(e.g., CAT, Rotator, etc.). These assignments should correspond to settings of the application software and
must be configured first in Router then in the application.
IMPORTANT:
Correct port assignment is critical for proper operation with application software.
Station Master Deluxe has six channels – each channel provides an indication of the settings applied by the
application and current state (e.g., or or off):
●
CAT
(uses RxD and TxD)
●
2
nd
CAT
(virtual “fork” for the main CAT channel)
●
Rotator
(uses RxD and TxD )
●
2
nd
Rotator
(virtual “fork” for main Rotator channel)
●
Auxiliary
(uses RxD and TxD)
●
Control
(uses RxD and TxD)
NOTE:
Do not assign virtual ports to the channels/functions that are not used by your applications. It is
unnecessary and only consumes resources.
●
iLINK couple –
used to connect Station Master Deluxe
with a
micro
HAM
micro
KEYER II, MK2R,
or MK2R+.
26
