M
‑
I SWACO
MONGOOSE PRO Shale Shaker
38
Field Installation and Operation Manual 9092F02001AENG (D)
38
•
The front two springs should be same height, and the back two springs should be same height.
NOTE
HEIGHT OF BACK SPRINGS MAY DIFFER FROM HEIGHT OF FRONT SPRINGS.
15.6
Maintaining Deck Adjustment Jack
15.6.1
Greasing Deck Adjustment Jack
The deck angle adjustment jacks have a grease fitting located on the discharge side of the jack (Refer to
Figure 33).
1.
Once a month, apply 10 shots of multi-purpose grease into grease fitting.
2.
Run deck angle adjustment up and down twice to allow grease penetration to jack inner screw.
Figure 33. Grease Port on the Elevator Jack (Arrowed)
15.7
Maintaining Screen Gaskets
15.7.1
Removing Screen Gaskets
WARNING
INTIATE A CONTROLLED SHUTDOWN. DISCONNECT AND LOCKOUT / TAG OUT THE
POWER SUPPLY TO THE CONTROL PANEL PRIOR TO ATTEMPTING ANY PARTS
REPLACEMENT OR MAINTENANCE PROCEDURE.
CAUTION
FAILURE TO REPLACE WORN OR HARDENED SCREEN GASKETS CAN RESULT IN
DAMAGE TO THE SCREEN BED. REPLACE THEM IN A TIMELY FASHION.
1.
Wash and remove all screens from shaker.