MGI JETVARNISH 3DS, User Manual

Page: 71 / 176

JETVARNISH 3DS 8. How to use the machine
User Manual - 71 -
8.4.2 Stacker adjustment
[6] Emergency button
[7] Start button
[8] Stop button
[9] Reset / power initialize button
[10] Up button
[11] Down button
[12] Stacker speed up button
[13] Stacker speed down button
The stacker can be controlled by the stacker panel.
The up [10] and down [11] buttons control the stacker. When the stacker plate [4] reaches the top pile
detection sensor [5]. the stacker plate stop. If you press one time the down button [11]. the automatic
mode will start and both up [10] and down [11] buttons will light up.
When the automatic mode is ON. the stacker plate [4] goes down automatically when a printed
substrate stays more than 2 seconds in front of the top pile detection sensor [5].
The stacker speed button [12] and [13] increase or decrease the speed of the driving rollers.
[7]
[10]
[9]
[11]
[8]
[6]
[12]
[13]