MGI JETVARNISH 3DS User Manual Download Page 52

Page: 52 / 176

JETVARNISH 3DS

Erreur ! Résultat incorrect pour u

ne table.

User Manual

- 52 -

[3]

Start the computer at the back of the machine. This step need to be acknowledged

[4]

During this step the machine make its initialization (the printing plate and purging tray are initialized).

[5]

The next step is to start the 3DSHM on the computer

The software makes the communication with all cameras and pilot. Then it checks the RCB and ICB
communication. To finish it checks the print heads licence.

The following window appears. Select the “LOGIN” and enter the “PASSWORD”.

As soon as you are logged. the pilot go automatically to the next step.

Summary of Contents for JETVARNISH 3DS

















































































































































































Search results

Summary of Contents for JETVARNISH 3DS

Reviews:

Related manuals for JETVARNISH 3DS

Brands by name

Popular brands

MGI JETVARNISH 3DS, User Manual

Search results

Summary of Contents for JETVARNISH 3DS

Reviews:

Related manuals for JETVARNISH 3DS

Brands by name

Popular brands