MGI JETVARNISH 3DS, User Manual

Page: 83 / 176

JETVARNISH 3DS 9. How to use the 3DSHM
User Manual - 83 -
9.3.5.4 Printer tab
[22] Paper
thickness:
Display the thickness of the substrate (Refer to 9.3.2 for
Position to adjust the thickness)
[23] Printing belt
speed
adjustment:
The printing belt maximum and minimum speeds are
automatically adjusted with the varnish thickness.
You can reduce the printing belt speed to allow the
varnish to spread.
[24] Printing belt
vacuum
adjustment:
You can adjust the vacuum power of the zones Z1
(under cameras). Z2 (under print heads) and Z3 (under
curing 1) depending of the substrate flatness
To have a perfect flat surface. increase the power of
vacuum for thick substrates and reduce the power for
light substrates.
[25] Substrate
length:
Display the length of the substrate.
[24]
[25]
[23]
[26]
[22]