MGI JETVARNISH 3DS, User Manual

Page: 21 / 176

JETVARNISH 3DS 2. Security and Safety Rules
User Manual - 21 -
3.4 Working Conditions
IMPORTANT!
It is your responsibility to guarantee the settings of the different terms of this document in order to
have the equipment working according to MGI specifications.
3.4.1 Installation
The machine needs to be installed on the flat stable floor to reduce noise and vibration. The machine is
provided with mounted feet to stabilized and level it. Please refer to the technical manual for
installation instruction.
3.4.2 Electrical Tension
Standard: 2x 220-240V 32A 50/60 Hz.
It is mandatory to be sure that the tension will not drop when all the machines are switched on. The
JETVARNISH 3DS must always be connected to the 230V power due to the ink circuit depression system.
3.4.3 Temperature & Humidity
The UV coating is applied using an UV inkjet system. It is important to ensure its viscosity is adequate. so
the machine needs an operating environment between 18 - 25°C (65 - 77°F)
The humidity needs to stay in the range of RH 35-55% without condensation.
To optimize the quality of the prints. and avoid damage to the heads. it is highly recommended to work
in a dust-free environment. Finishing equipment produces a lot of dust and should not be in the same
environment as the JETVARNISH 3DS.
3.4.4 Sun
The machine cannot be directly exposed to the sunlight.
3.4.5 Workstation
The operators must have a workstation for consumables cleaning and all the recommended tools for
maintenances operations (information given during the training)
3.4.6 Storage
- Varnish
The JETVARNISH coating should be stored at ambient temperature (18-30° Celsius). in particular 4 to 8
hours before being loaded in the machine.