MGI JETVARNISH 3DS, User Manual

Page: 80 / 176

JETVARNISH 3DS 9. How to use the 3DSHM
User Manual - 80 -
9.3.4 Camera
[13] Cameras
selection:
By clicking on the icon you can select or disable the
camera.
Indicate the identification of the configured crop mark.
(Refer to Chapter 10 for MGI ARC system)
Start the MGI ARC system software to configure the
cameras.
(Refer to Chapter 10 for MGI ARC system)
[14] Crop mark
position:
If you use both cameras. you have to indicate to the
3DSHM the position of the crop mark on the substrate.
1. Measure the distance between the left edge of the
substrate and the left crop mark. then put it on the
first value.
Only if you use both cameras
2. Measure the distance between the two crop marks.
then put it on the second value.
[15] Bar code
camera:
Only available if you are equipped with the Variable
Data option.
[13]
[14]
[15]