MFZ Ovitor FS 345, Operating Instructions Manual

Page: 25 / 40

GB
FS 345 Door Controls / Rev.A 0.0 – 25
9.4 LED indications of the FS101
The FS 345 control unit is equipped with a row of LEDs that indicate the current operating status of the system and indicate any faults
that may occur. The following table gives an overview of the various faults and status conditions.
K04 K05
K06 K07 K08
K09
K10
K11
K12
F
S
1
0
1
-P
1
-1
D018 D017 D016
D02 D01 D03
D04 D05
D06 D07 D08 D09
D010 D011
D012
D013
D014
D015
D019
9.5 LED diagnostic FS 101
Code Colour Description Error diagnosis
D01 yellow LED safety circuit
(input X03/1,2)
LED ON
LED OFF OK
- No power supply from mains or rechargeable battery
- Operator safety circuit interrupted
D02 yellow LED limit switch OPEN
(input X03/3,4,5)
LED ON
LED OFF Limit switch OPEN not confirmed
Limit switch OPEN confirmed
D03 yellow LED limit switch CLOSED
(input X03/6,7,8)
LED ON
LED OFF Limit switch CLOSED not confirmed
Limit switch CLOSED confirmed
D04 yellow LED auxiliary motor
(output X04/1,2)
LED ON
LED OFF Auxiliary motor is active
Auxiliary motor 24V DC is not active
D05 yellow LED motor brake (output
X04/3,4)
LED ON
LED OFF Motor brake is switched on
Motor brake is switched off
D06 yellow LED drive command open/
close
(output X04/ 5,6)
LED ON
LED OFF Drive command open/close on CS 300 FS is active
Drive command open/close on CS 300 FS is not active
D07 yellow LED limit switch OPEN
(output X05/1,2)
LED ON
LED OFF Limit switch OPEN not confirmed
- Limit switch OPEN confirmed
- Emergency operation is active
D08 yellow LED limit switch CLOSED
(output X05/3,4)
LED ON
LED OFF Limit switch CLOSED not confirmed
Limit switch CLOSED confirmed