GB
FS 345 Door Controls / Rev.A 0.0 – 17
6.2 FDF / FTA / FDS limit switch settings
1.
Additional OPEN limit switch green
2. Limit switch OPEN
green
3.
Safety limit switch OPEN
red
4.
Safety limit switch CLOSED
red
5.
Limit switch CLOSED
white
6.
Additional limit switch CLOSED
white
NOTICE
Damage to property or irreparable damage due to
incorrect adjustment!
The door can be damaged if it is driven beyond the end
position while adjustments are being made.
1.
Select the ADJUSTMENT menu on the display
2.
Move the door to the desired CLOSED position with the +
and - buttons.
3.
Set control cam 5 (white) so that the limit switch is actu
-
ated.
4.
Tighten fastening screw A.
5.
Screw B can be used to carry out fine tuning.
6.
Move the door to the desired OPEN position with the +
and - buttons.
7.
Set control cam 2 (green) so that the limit switch is actu
-
ated.
8.
Tighten fastening screw A.
9.
Safety limit switches 3 and 5 (red) must be set so that
they are triggered as soon as the control limit switches are
crossed.
10.
After the trial run, check the tightness of the fastening
screws.
11.
Auxiliary limit switches 1 and 6 have a potential-free
changeover contact
