GB
FS 345 Door Controls / Rev.A 0.0 – 3
3. General safety instructions
DANGER!
Failure to comply with the documentation could
result in life-threatening danger!
Be sure to follow all the safety instructions in this docu-
ment.
Warranty
The function and safety of the equipment is only guaranteed if
the warning and safety instructions included in these operat-
ing instructions are adhered to.
MFZ Antriebe GmbH + Co. KG is not liable for personal injury
or damage to property if these occur as a result of the warn-
ings and safety advice being disregarded.
MFZ does not accept any liability or warranty for damage due
to the use of non-approved spare parts and accessories.
Intended use
The FS 345 control is intended exclusively for controlling door
systems with mechanical limit switches.
Target group
Only qualified and trained electricians may connect, pro
-
gramme and service the control.
Qualified and trained electricians must meet the following
requirements:
− Knowledge of the general and specific safety and accident
prevention regulations,
− Knowledge of the relevant electrical regulations,
− Training in the use and care of appropriate safety equip
-
ment,
− Capable of recognising the dangers associated with elec
-
tricity.
Instructions regarding installation and connection
− The control is designed with X type terminals.
− The control must be disconnected from the electricity
supply before carrying out any electrical work. It must be
ensured that the electricity supply remains disconnected for
the duration of the work.
− Local protective regulations must be complied with.
Information concerning operation
− Unauthorised persons (particularly children) should not be
allowed to play with permanently installed adjusting or
control devices.
− Keep remote control beyond the reach of children.
Regulations and bases for testing
For connecting, programming and servicing, the following
regulations must be observed (the list is not exhaustive).
Construction product standards
− EN 13241-1 (Products without fire resistance or smoke
control characteristics)
− EN 12445 (Safety in use of power operated doors - Test
methods)
− EN 12453 (Safety in use of power operated doors - Re
-
quirements)
− EN 12978 (Safety devices for power operated doors and
gates - Requirements and test methods)
EMC
− EN 55014-1 (Electromagnetic compatibility - Requirements
for household appliances)
− EN 61000-3-2 (Disturbances in supply systems - harmonic
currents)
− EN 61000-3-3 (Disturbances in supply systems - voltage
fluctuations)
− DIN EN 61000-6-2 (Electromagnetic compatibility (EMC)
- Part 6-2: Generic standards – Immunity for industrial
environments)
− DIN EN 61000-6-3 (Electromagnetic compatibility (EMC)
- Part 6-3: Generic standards – Emission standard for
residential, commercial and light-industrial environments)
Machinery Directive
− EN 60204-1 (Safety of machinery, electrical equipment of
machines Part 1: General requirements)
− EN ISO 12100 (Safety of machinery – general principles for
design - risk assessment and risk reduction)