36
INSTRUCTION MANUAL
– BALER Z562
Replenishing the fluid (the required fluid quantity in the box is 3l)
•
Unscrew and remove the cap in the top section of the transmission box
•
Replenish the fluid
•
After replenishing the fluid, clean and replace the cap
Figure 47.
The fluid level in the gearbox
4.17 Lubrication
Lubricate the drive chains with transmission fluid after each 5 hours of baler use, or
after baling of 50 bales. Lubricate the places marked with a pictogram (Figure 48) before each
time you use the baler.
Important. Use transmission-fluid type 80W90.
WARNING!
All the items listed below must be lubricated at the beginning and at the
end of each season.
WARNING