24
INSTRUCTION MANUAL
– BALER Z562
4.7
Pick-Up Cam Adjustment
Depending on the type of collected material and working conditions, adjust the cam so
that it does not pull the material. Procedure.
•
Loosen the bolts and remove the guard from the left side of the pick-up
•
Loosen 4 nuts which hold the cam
Figure 34.
Pick-up cam adjustment
•
Adjust the cam position turn it to move the pick-up tine closer to or further from the
transmission device. Rotate the cam
▪
i
n direction “A” – to move the pick-up tine further from the pick-up unit
▪
in
direction “B” – to move the pick-up tine closer to the pick-up unit