14
INSTRUCTION MANUAL
– BALER Z562
3.6.2 The Optional Hydraulic System
The baling press hydraulic system is supplied from the single-circuit power hydraulic
system of the tractor.
Connect the opening/closing of the rear cover and the raising/lowering of the pick-up to
the tractor power hydraulic system by means of the connection line. Controlling the actuators
of raising and lowering the pick-up is effected by the hydraulic control system located in the
tractor cab. Install the control lever for the baler hydraulics in the cab next to the operator's
seat.
Set the control lever for the baler hydraulics in the position of the baler pick-up/rear
cove control to carry out the check of the hydraulic system. After setting the baler hydraulics-
control lever in the chosen position of the tractor hydraulics control lever, check the operation
functions (lifting and lowering) of the pick-up and cover of the rear rolling press.
Figure 23.
Controlling the baler hydraulics
Lifting
Lowering
Pick-up
Chamber