20
INSTRUCTION MANUAL
– BALER Z562
4 Maintenance and Adjustment
Before you commence any maintenance work, follow the safety rules set out in
Section
1.6 “General safety principles”.
If the baler is connected to the tractor, apply the manual brake, disable the engine, and
remove the ignition key. Remember to switch off the control panel too.
During maintenance work, when the chamber is open, use the locks to secure the
actuators.
Figure 29.
Locks for securing the actuators
Secure the raised baler cover in its upper position, as shown in Figure 29. On both
sides of the baler, use clamps (2) fixed to the upper pins of the hydraulic cylinders (1) to secure
them. Move the clamps (2) fully upwards so that they engage with the stretched cylinder rods.
Lock them with locking pins (4) against unauthorised cover closing. Unlock the clamps of the
cover after completing the planned activities.
DANGER!
All activities related to maintenance and adjustment must be carried out
during machine stoppage and when all the moving parts of the machine
have stopped.
DANGER
WARNING!
Use original spare parts only.
WARNING