58
INSTALLATION INSTRUCTIONS
9.1.7 Corner Mount
Corner Support Installation Instructions
(1) Drill 4 holes on the wall of diameter φ3/8” (9.5mm), depth 1-1/2” (40mm).
(2) Hammer screw mounts into the drilled holes (Figure 1).
(3) Line up the holes on the water-proof box to the holes on the support, and
use a hex driver to secure in the clockwise direction (Figure 2).
(4) Installation completed (Figure 3).
Note:
When using water sealant, the entire portion of the spiral tooth of the
extension pole and the connector ring must be applied with the sealant. This
will prevent rain water leaking through the connection.
The holes on the wall support are of diameter φ10 mm. Please make sure the
drilled holes are of correct size to ensure proper installation.
Warning:
When using in an outdoor environment, the safety cable must be connected
to the main unit and safety wire screw hole. This will avoid personal hazards
if the unit falls from its installation.
Make sure there are no damaged parts during assembly.
Figure 1
Figure 2
Figure 3
A
Corner Mount
adapter
B
Expansion anchor
C
Hexagon head nuts
Summary of Contents for NIC910/930/950HPro
