24
OPERATION INSTRUCTIONS
position, then press number key “91” + hold the
key for 2 seconds.
The screen will show: MANUAL RIGHT LIMIT, and the right limit will be set.
6.5.5 RECOVER TIME:
Under scan mode (auto, frame, random), if the auto patrol and pattern patrol are
interrupted from inadvertent keypad controller input, the camera will resume the
previous action after a set amount of time. The recovery time can be configured
from 1 to 120 min, and can be disabled (OFF).
Main Menu
<PAN/TILT SETUP> menu
Set the Recovery Time:
1. Press “95” + hold the
key for 2 seconds to enter the main menu screen.
2. Move the cursor to <PAN/TILT SETUP>, and then press the
key to
enter <PAN/TILT SETUP> menu.
3. Move the cursor to the RECOVER TIME selection and then press the
key to enter.
4. Move the joystick up/down to set the time.
5. Press the
key to confirm selection, or press the
key to cancel
selection and exit from the menu screen.
6.5.6 SCAN SPEED:
Auto, random, and frame scan speed can be configured between 1° ~ 90° /sec,
but cannot exceed the MAX SPEED setting.
Main Menu
<PAN/TILT SETUP> menu
Set the Scan Speed:
1. Press “95” + hold the
key for 2 seconds to enter the main menu screen.
2. Move the cursor to <PAN/TILT SETUP>, and then press the
key to
Summary of Contents for NIC910/930/950HPro
