Messoa NIC910/930/950HPro, Instruction Manual, Page: 30 / 68

30
OPERATION INSTRUCTIONS
Activate the Preset WD:
1. Press the key to enter the main menu screen.
2. Move the cursor to <PRESET SETUP>, and then press the key to
enter <PRESET SETUP> menu.
3. Move the cursor to the PRESET WD selection and then press the key
to enter.
4. Move the joystick up/down to choose the position(P0~66), and left/right to set
OFF, BLC, or WDR.
5. Press the key to confirm selection, or press the key to cancel
selection and exit from the menu screen.
6.7.5 PRESET MOTION: (For WDR model only)
User can enable motion function for individual preset points. You can create and
move up to 4 motion areas for every individual present point.
Note: PRESET MOTION function only support certain models and support
P0~P10 preset point only.
Main menu <PRESET SETUP> menu
<PRESET MOTION> menu
Activate the Preset motion:
1. Press the key to enter the main menu screen.
2. Move the cursor to <PRESET SETUP>, and then press the key to
enter <PRESET SETUP> menu.
3. Move the cursor to the PRESET MOTION selection and then press the
key to enter.
4. Move the joystick up/down to choose the position(P0~10), and left/right to set ON,
or OFF.
5. Move the cursor to the MOTION AREA selection and then press the
key to enter.
6. Press the key to confirm the zone #, and then move zone.
Screen display: MOTION AREA 1 MOVE
7. Press the key to confirm the zone # , and then go to the setup screen
for the zone size:
Screen display: MOTION AREA 1 SIZE
8. Move the joystick up/down to set the zone size.
9. Press the key to exit from the menu screen.