Messoa NIC910/930/950HPro, Instruction Manual, Page: 14 / 68

14
OPERATION INSTRUCTIONS
Note: Please use the menu command <PAN/TILT SETUP> STOP TIME (P0) to
configure the stop time, range from 5 sec to 120 sec.
6.4 Camera Settings:
6.4.1 FOCUS:
Main menu <CAMERA SETUP> menu <FOCUS> menu
Description:
These focus modes to choose from:
- Manual: Use the and keys to control the focus.
- AUTO: Press the or keys to switch to manual focus mode until
the commands for lens zoom, horizontal, and vertical rotate button control
signals are received.
- IN ICR ON: Enables focus compensation in ICR On mode.
- ONE PUSH AF: Perform AF operation once in Manual Focus mode.
- INTERVAL: The camera will switch between auto focus and manual focus
modes according to the Active time and Interval time settings: Active Time
(auto)→Interval Time (manual) →Active Time (auto)→Interval Time (manual)…
Interval and Active time settings range between 0 and 255 seconds.
- ZOOM TRIGGER: The camera will remain under manual focus mode until the
control signals for or are received from the keypad. After the
action is carried out, the camera will return to manual focus mode.
Auto focus sensitivity can be set to Normal or Low.