25
OPERATION INSTRUCTIONS
enter <PAN/TILT SETUP> menu.
3. Move the cursor to the SCAN SPEED selection and then press the
key
to enter.
4. Move the joystick up/down to set the speed.
5. Press the
key to confirm selection, or press the
key to cancel
selection and exit from the menu screen.
6.5.7 STOP TIME:
Under random, frame, or auto scan modes, the STOP TIME can be set. During
scanning, the camera will pause at each stop position from 5 sec to 120 sec.
Main Menu
<PAN/TILT SETUP> menu
Set the Stop Time:
1. Press the
key to enter the main menu screen.
2. Move the cursor to <PAN/TILT SETUP>, and then press the
key to
enter <PAN/TILT SETUP> menu.
3. Move the cursor to the STOP TIME selection and then press the
key
to enter.
4. Move the joystick up/down to choose the position, and left/right to set the time.
5. Press the
key to confirm selection, or press the
key to cancel
selection and exit from the menu screen.
6.5.8 MAX SPEED:
The max speed for horizontal pan/vertical tilt can be configured between 1° to
430° /sec. To lower the amount of noise, it is recommended that a lower speed
be used.
Main Menu
<PAN/TILT SETUP> menu
Summary of Contents for NIC910/930/950HPro
