31
OPERATION INSTRUCTIONS
10. Move the joystick up/down to choose the threshold LEVEL selection, and left/
right to set HI, MID or LOW.
11. Move the joystick up/down to choose the INTERCAL TIME selection, and left/
right to set the time.
12. Press the
key to confirm selection, or press the
key to cancel
selection and exit from the menu screen.
6.8 OTHERS MENU:
6.8.1 FREEZE ACTIVITY:
When the camera is in frame, random, auto, or preset scanning modes, the
camera screen can be disabled during movement, and the screen image will
only be shown until the camera reaches the stop point.
Main Menu
<OTHERS> menu
<MOTION DETECTION>
Set Freeze Activity:
1. Press “95” + hold the
key for 2 seconds to enter the main menu screen.
2. Move the cursor to <OTHERS>, and then press the
key to enter
<OTHERS> menu.
3. Move the cursor to the FREEZE ACTIVITY selection and then press the
key to enter.
4. Move the joystick up/down to set ON or OFF.
5. Press the
key to confirm selection, or press the
key to cancel
selection and exit from the menu screen.
6.8.2 SCAN TILT ANGLE:
The camera tilt angle can be configured for different application requirements.
Main Menu
<OTHERS> menu
<MOTION DETECTION>
Summary of Contents for NIC910/930/950HPro
