Messoa NIC910/930/950HPro, Instruction Manual, Page: 35 / 68

35
OPERATION INSTRUCTIONS
<PASSWORD> menu.
4. Move the cursor to PASSWORD ENABLE and press the key to enter
the option. Use the joystick up/down to set ON or OFF.
5. If ON is selected, please enter the password. Press the key to enter
the PASSWORD menu.
6. Move the joystick up/down to set the password.
7. Press the key to confirm selection, or press the key to cancel
selection and exit from the menu screen.
6.9.4 POWER UP Mode:
The camera can be configured to different moves after power up:
(a).PARK: The camera will move to the first preset position.
(b).AUTO SCAN: The camera will run auto scan.
(c).FRAME SCAN: The camera will run frame scan.
(d).RANDOM SCAN: The camera will run random scan.
(e).AUTO PATROL: The camera will run auto patrol.
(f).PATTERN 1: The camera will run pattern 1.
(g).BY DEFAULT: The speed dome would return to default setting after power
on. Ex, if the default setting is Auto Scan, the speed dome would run Auto
Scan after power on.
(h).SCHEDULE: If the default setting is SCHEDULE, the speed dome would
run the path setting in SCHEDULE after power on.
Note: 1. If Recover Time is enabled, the speed dome would still enable
Recover Time function after power on.
2. When a schedule mode is ON and within the schedule time interval,
the dome will still perform scheduling after power up from abnormal
power lost; regardless of the setting for power on Menu.
Main Menu <SYSTEM> menu
LANGUAGE
ACTION
ENGLISH
AUTO RETURN
Set the Power Up Mode:
1. Press the key to enter the main menu screen.
2. Move the cursor to <SYSTEM>, and then press the key to enter <SYS-
TEM> menu.
3. Move the cursor to the POWER UP selection and then press the key to enter.
4. Move the joystick up/down to set the power up mode.