!
When closing the cover, make sure that it is
lying correctly on the fuse box. Moisture seep-
ing in or dirt could otherwise impair the oper-
ation of the fuses.
If a new fuse blows again, have the cause deter-
mined and rectified at a qualified specialist
workshop.
Make sure of the following before replacing a
fuse:
R
the vehicle is secured against rolling away.
R
all electrical consumers are switched off.
R
the ignition is switched off.
The fuses are located in various fuse boxes:
R
fuse box in the engine compartment on the
left-hand side of the vehicle (
Y
page 208).
R
fuse box in the glove compartment on the co-
driver's side (
Y
page 208).
Fuse box in the engine compartment
Requirements:
R
observe the notes on electric fuses
(
Y
page 207).
X
Remove any moisture from the fuse box using
a dry cloth
:
.
X
Press onto the locking pin and remove the
fuse/line fuse cover.
X
Replace the blown fuse.
X
Reattach the fuse/line fuse cover and push to
close.
Fuse box in the glove compartment
Requirements
R
Observe the notes on electric fuses
(
Y
page 207).
X
Open the glove compartment
;
.
X
Press the sides of the glove compartment
flap
:
together until the lateral studs slide
out of the guide.
X
Fold the glove compartment flap down.
The fuse box is behind the glove compartment
flap.
X
Replace the blown fuse.
X
Press the sides of the glove compartment flap
together until the studs slide back into the
guide.
X
Close the glove compartment.
208
Fuses
Breakdown
assistance
