u
Driver's and co-driver's seats occupied
1
Driver's, co-driver's and rear seats occupied
2
Driver's seat, co-driver's seat and rear seats
occupied, load surface laden
3
Driver's and co-driver's seats occupied and
use of the maximum permissible rear axle
load
X
Turn headlamp range controller to the posi-
tion appropriate to the vehicle load.
Operating the combination switch for
lights
:
Main-beam headlamps
;
Turn signal, right
=
Headlamp flasher
?
Turn signal, left
Requirements
R
The dipped-beam headlamps are switched
on.
X
To switch on the main-beam headlamps:
switch on the dipped-beam headlamps
(
Y
page 79).
X
Press the combination switch beyond the
pressure point in the direction of the
arrow
:
.
The main-beam indicator lamp comes on.
X
To switch off the main-beam headlamps:
move the combination switch back to its out-
of-use position.
X
To indicate briefly: press the combination
switch briefly to the pressure point in the
direction of the arrow
;
or
?
.
The corresponding turn signal flashes three
times.
X
To indicate permanently: press the combi-
nation switch beyond the pressure point in
the direction of the arrow
;
or
?
.
Switching hazard warning lamps on
and off
X
Press the
:
button.
Switching the loading area lighting on
and off
80
Exterior lighting
Li
ght
and
vi
si
bi
lity
