Mercedes-Benz V 200 d, Operating Instructions Manual

Page: 359 / 404

Useful information
These Operating Instructions describe all mod-
els as well as standard and optional equipment
of your vehicle that were available at the time of
going to print. Country-specific variations are
possible. Note that your vehicle may not be fit-
ted with all of the described functions. This also
applies to safety-relevant systems and func-
tions.
Read the information on qualified specialist
workshops: (
Y
page 31).
Where will I find...?
Vehicle tool kit
General notes
The vehicle tool kit is in the rear stowage com-
partment.
Apart from some country-specific variants, vehi-
cles without a spare wheel are not equipped
with tyre-changing tools. If your vehicle is equip-
ped with tyre-changing tools, these are in the
vehicle tool kit in the rear stowage compart-
ment. Some tools for changing a wheel are spe-
cific to the vehicle. For more information on
which tools are required and approved to per-
form a wheel change on your vehicle, consult a
qualified specialist workshop.
Necessary tyre-changing tools can include, for
example:
R
Jack
R
Wheel wrench
R
Ratchet ring spanner
i The jack has a maximum weight of 7.5 kg
depending on the vehicle's equipment.
You will find the maximum load-bearing capa-
city of the jack stated on the adhesive label
attached to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a qualified spe-
cialist workshop.
Stowage compartment in the rear
Stowage compartment in the rear on the right-hand
side of the vehicle
Unlocking and removing the cover
X If necessary, fold up the rear seat.
X Turn top rotary catch
:
clockwise and bot-
tom rotary catch
:
anti-clockwise.
X Remove cover
;
.
Inserting and engaging the cover
X
Position cover
;
.
X
Turn top rotary catch
:
anti-clockwise and
bottom rotary catch
:
clockwise.
X
Fold down the rear seat.
Removing the vehicle tool kit and jack
X
Remove clamping strap
?
.
X
Lift off tool holder cover
=
.
X
Carefully pull the tool kit and jack upwards out
of the stowage compartment. Lift the jack
slightly before removing it and turn it to a
diagonal position in the stowage compart-
ment.
Stowing the vehicle tool kit and the jack
X
Before stowing, wind the jack to the fully
closed position and place it so that the hand
Where will I find...?
357
Breakdown assistance