Mercedes-Benz V 200 d, Operating Instructions Manual

Page: 374 / 404

Warning messages of the tyre pressure
monitor
If the tyre pressure monitor detects a loss in
pressure in one or more tyres, a warning mes-
sage is shown in the display and the
h
warn-
ing lamp comes on.
R
If the
Please correct tyre pressure
message is shown in the display, the tyre
pressure in at least one tyre is too low and
must be corrected at the next opportunity.
R
If the
Tyre pressure Check tyres
mes-
sage is shown in the display, the tyre pressure
in one or more tyres has dropped significantly
and the tyres must be checked.
R
If the
Tyre pressure Caution Tyre mal‐
function
message is shown in the display,
the tyre pressure in one or more tyres is drop-
ping suddenly and the tyres must be checked.
Always observe the instructions and safety
notes related to the display messages, which
can be found in the "Tyres" section
(
Y
page 280).
If the wheel positions on the vehicle are inter-
changed, the tyre pressures may be displayed
for the wrong positions for a short time. This is
rectified after a few minutes of driving; the tyre
pressures are then displayed for the correct
positions.
Restarting the tyre pressure monitor
When you restart the tyre pressure monitor, all
existing warning messages are deleted and the
warning lamps go out. The monitor uses the cur-
rently set tyre pressures as the reference values
for monitoring. In most cases, the tyre pressure
monitor will automatically detect the new refer-
ence values after you have changed the tyre
pressure. However, you can also define refer-
ence values manually as described here. The
tyre pressure monitor then monitors the new
tyre pressure values.
Use the steering wheel buttons.
X Make sure that the tyre pressure of all four
wheels is set correctly for the current oper-
ating conditions. When doing so, observe the
notes under "Tyre pressure" (
Y
page 369).
X
Turn the key to position 2 in the ignition lock.
X
Press
ò
on the steering wheel to call up
the list of menus.
X Press the
9
or
:
button on the steering
wheel to select the
Service
menu.
X Press the
a
button.
X Use the
9
or
:
button to select
Ser‐
vice
.
X Press the
a
button.
The display shows the current tyre pressure of
each wheel or the
Tyre pressures will
be displayed after a few minutes of
driving
message.
X Press the
:
button.
The display shows the
Use current pres‐
sures as new reference values
mes-
sage.
If you wish to confirm the restart:
X Press the
a
button.
After you have driven for a few minutes, the
system checks whether the current tyre pres-
sures are within the specified range. The new
tyre pressures are then accepted as refer-
ence values and are monitored and displayed.
If you wish to cancel the restart:
X
Press the
%
button.
The tyre pressure values stored at the last
restart will continue to be monitored.
Radio type approval for the tyre pres-
sure monitor
Country Radio type approval num-
ber
Argentina CNC: H-12336
Model: Schrader HSW4
Brazil 0381-13-8001
Model: GG4
Jordan Model: Mercedes
HS Snap in 433 MHz
Manufacturer:
Schrader Electronics Ltd.
Type Approval Number:
TRC/LPD/2013/48
Type Number: LPD
Morocco MR7907 ANRT 2013
05/03/2013
Moldova 1024
Philippines No: ESD-1306995C
372
Tyre pressure
Wheels and tyres