Mercedes-Benz V 200 d, Operating Instructions Manual

Page: 121 / 404

The head restraints can be removed and fitted
as follows.
X
To remove: pull the head restraint up to the
stop.
X
Press release knob
:
and pull out the head
restraint.
X
To fit: insert the head restraint so that the rod
with the detents is on the left when viewed in
the direction of travel.
X
Push the head restraint down until it engages.
Adjusting the head restraints electri-
cally
! Do not adjust the height of the electrically
adjustable head restraint by hand. You could
otherwise damage the head restraint's mech-
anism.
Control panel on the door trim
X
To adjust the height: turn the key in the igni-
tion lock to position 2.
or
X Open the door.
X Slide switch
:
up or down in the direction of
the arrow.
i If the ignition is not switched on, you can
adjust the head restraint height within
30 seconds of unlocking the vehicle.
X
To move forwards: pull the head restraint
forwards until it engages in the required posi-
tion.
X
To move backwards: press and hold down
release knob
;
and slide the head restraint
back to the desired position.
X
Let go of release button
;
.
X
Ensure that the head restraint has engaged
properly.
Armrests
X To adjust the armrest angle: fold the arm-
rest upwards by more than 45° to position
2
.
The armrest is released.
X Fold armrest forwards
3
to the stop.
X Slowly fold the armrest upwards to the
desired position.
X
To fold the armrest up: if necessary, fold the
armrest upwards by more than 90° to posi-
tion
1
.
Seat heating
Seat heating for the front seats
G
WARNING
If you repeatedly switch on seat heating, the
seat cushion and backrest padding may
become very hot. The health of vehicle occu-
pants with limited temperature sensitivity or a
limited ability to react to high temperatures
Seats
119
Seats, steering wheel and mirrors
Z