Mercedes-Benz V 200 d, Operating Instructions Manual

Page: 168 / 404

If you set identical departure times (time and
day of the week) for the three preselection
times, only the last time set is saved.
After a malfunction or if the battery has been
disconnected, you must set the departure times
again. You can find further information on mal-
functions in the "Problems with the auxiliary
heating" section (
Y
page 167).
X
Press the
Û
or
â
button until the
B
symbol in the menu bar flashes.
X
Press the
b
button.
In the program column, the
G
preselection
memory numbers appear. The selected pre-
selection time flashes.
X
Press the
Û
or
â
button to select the
desired preselection time.
X
Press the
b
button.
The preselection time is selected. The days
are shown.
X Set the day and time as described in the "Set-
ting the day, time and operating duration"
section (
Y
page 165).
The departure time is stored. The program
column disappears. In the display panel, the
on
message and the
y
symbol appear.
X Press the
b
button.
The operating duration flashes.
X Press the
Û
or
â
button to set the
minute value (10 to 120).
X
Press the
b
button.
The operating duration for the preselection
time is saved. The time and number of the
selected preselection memory are shown.
The preselection memory that will be activa-
ted next is underlined. Additionally, the day
that is set appears.
Deactivating departure times
X
Carry out the steps as described in the "Set-
ting the departure times" section
(
Y
page 165).
If the
y
symbol in the status bar is shown:
X
Press the
Û
or
â
button until the
off
message in the display panel is shown.
X
Press the
b
button.
The departure time is deactivated. The time is
shown.
Setting the heating level
You can set the heating level to a range between
10 and 30.
The heating level corresponds to a preselection
temperature for the vehicle interior. This is a
guide value and may, depending on the outside
temperature, differ from the interior tempera-
ture.
X
Press the
Û
or
â
button until the
ß
symbol in the menu bar flashes.
X
Press the
b
button.
The heating level display flashes.
X
Using the
Û
and
â
buttons, set the
desired heating level to a range between 10
and 30.
X
Press the
b
button.
The heating level is set and the
y
symbol
appears.
Replacing the remote control battery
G
WARNING
Batteries contain toxic and corrosive substan-
ces. If batteries are swallowed, it can result in
severe health problems. There is a risk of fatal
injury.
Keep batteries out of the reach of children. If
a battery is swallowed, seek medical attention
immediately.
H
Environmental note
Batteries contain pollutants.
It is illegal to dispose of them
with the household rubbish.
They must be collected sep-
arately and disposed of in an
environmentally responsible
recycling system.
Dispose of batteries in an
environmentally responsible
manner. Take discharged
batteries to a qualified spe-
cialist workshop or to a col-
lection point for used batter-
ies.
If the indicator lamp in the remote control
flashes red rapidly, the battery needs to be
replaced.
166
Operating the auxiliary heating system
Climate control