Mercedes-Benz V 200 d, Operating Instructions Manual

Page: 118 / 404

Example: standard rear bench seat
:
Release handle for rear seat anchorage
;
Release handle for front seat legs
=
Seat anchorages
i Always carry out unlocking, removal and
subsequent refitting of the seat/berth com-
bination at the marked basic position
(
Y
page 108).
X To remove: if necessary, remove the bed
extension (
Y
page 117).
X Remove the stowage compartments
(
Y
page 313).
X
Make sure that all carriages for fore-and-aft
adjustment engage audibly on both sides.
It should not be possible to move the seat/
berth combination.
X Fold release handle for rear seat anchor-
age
:
up.
X
Tilt the seat/berth combination forward using
the upper edge of the seat backrest.
X
Pull release handle for front seat legs
;
up.
X
Hold the seat/berth combination by the lower
edge of the seat cushion.
X
Fold the seat/berth combination forwards
and lift it out of seat anchorages
=
.
X
To fit: remove the stowage compartments
(
Y
page 313).
X
Hold the seat/berth combination by the lower
edge of the seat cushion.
X
Place the seat/berth combination into front
seat anchorages
=
from above and make
sure it engages.
X Fold release handle
;
down towards the
vehicle floor.
X Fold seat/berth combination back into the
upright position.
The rear seat legs of the seat/berth combina-
tion have engaged correctly if:
R
the seat legs engage audibly
R
indicator tabs
?
on the seat legs are no lon-
ger visible and have retracted fully into the
seat legs
The rear seat legs of the seat/berth combina-
tion have not engaged correctly if:
X
Press release handle for rear seat legs
:
down until indicator tabs
?
have fully retrac-
ted into the rear seat legs.
The rear seat legs of the seat/berth combina-
tion have not engaged correctly again if:
X
Fold the seat/berth combination forwards
again with a degree of force so that the seat
legs engage correctly.
X
Fit the stowage compartments (
Y
page 313).
116
Seats
Seats, steering wheel and mirrors