Mercedes-Benz V 200 d, Operating Instructions Manual

Page: 162 / 404

Checking the status of the auxiliary heat-
ing
X
Briefly press the
u
button.
The following messages may appear in the dis-
play:
Display Meaning
The auxiliary heating is
switched off.
The auxiliary ventilation is
switched on and the num-
ber in the display shows
the remaining time in
minutes.
The auxiliary heating is
switched on and the num-
ber in the display shows
the remaining time in
minutes.
A departure time has been
activated. The departure
time appears in the dis-
play.
A departure time has been
activated. The auxiliary
ventilation is switched on
and the number in the dis-
play shows the remaining
time in minutes. If the
vehicle is not started after
this remaining time, the
running time is increased
by five minutes.
A departure time has been
activated. The auxiliary
heating is switched on and
the number in the display
shows the remaining time
in minutes. If the vehicle is
not started after this
remaining time, the run-
ning time is increased by
five minutes.
Setting a departure time
Observe the notes on the auxiliary heating timer
function (
Y
page 158).
Make sure that the time in the vehicle has been
set correctly before you set the departure time
(see the separate operating instructions). Oth-
erwise, the auxiliary heating may switch on at
the wrong time and at an unsuitable location.
When setting the departure time, also observe
the important safety notes for operation of the
auxiliary heating (
Y
page 157).
X
Briefly press the
u
button.
X
Press the
,
or
.
button repeatedly
until the display shows the time to be
changed.
X
Press the
u
and
^
buttons simultane-
ously.
The
Î
symbol in the remote control display
flashes.
X
Set the desired departure time using the
,
or
.
button.
i The longer you press the
,
or
.
but-
ton, the faster the time changes.
X
Press the
u
and
^
buttons simultane-
ously.
The new departure time is stored.
Activating the set departure time
X Briefly press the
u
button.
X Press the
,
or
.
button repeatedly
until the displays shows the desired departure
time.
X
Press the
u
button.
The display shows the
Í
symbol and the
departure time with its code letters A, B or C.
Deactivating the set departure time
X
Briefly press the
u
button.
X
Press the
,
or
.
button.
The display shows the status of the auxiliary
heating.
X
Press the
.
button.
The display shows the first departure time
saved.
X
Press the
^
button.
The display shows
OFF
Replacing the remote control battery
G
WARNING
Batteries contain toxic and corrosive substan-
ces. If batteries are swallowed, it can result in
severe health problems. There is a risk of fatal
injury.
160
Operating the auxiliary heating system
Climate control