Mercedes-Benz V 200 d, Operating Instructions Manual

Page: 233 / 404

In vehicles with a trailer coupling installed, the
function mode in the reversing camera can be
switched over when the trailer is reached. The
reversing camera then changes the camera
angle and shows a locating aid for the ball cou-
pling of the trailer tow hitch to help reach the
drawbar.
X
To switch function mode: select and con-
firm "Reverse parking" function
:
or "Cou-
pling up a trailer" function
;
with the multi-
media system controller.
The symbol of the selected function is high-
lighted.
X
To switch off: shift the manual transmission
to neutral or engage a gear. Shift the auto-
matic transmission to N or D.
The dynamic guide lines are hidden and after
about 15 seconds the reversing camera
switches itself off.
or
X Drive forwards more than about 10 m.
or
X
Drive forwards faster than 10 km/h.
or
X
Shift the automatic transmission to P.
In vehicles with Active Parking Assist, the
reversing camera remains switched on after the
initial shift to reverse gear for the whole duration
of active parking assistance. You can find infor-
mation on active parking assistance under
"Active Parking Assist“ (
Y
page 225).
Information on the multimedia system control-
ler can be found in the separate operating
instructions.
Messages in the multimedia system dis-
play
:
Yellow guide line at a distance of approx-
imately 4.0 m from the rear of the vehicle
;
White guide line without turning the steering
wheel, vehicle width including the exterior
mirrors (static)
=
Yellow guide line for the vehicle width
including the exterior mirrors, at the current
steering angle (dynamic)
?
Yellow lane marking the course the tyres will
take at the current steering angle (dynamic)
A
Vehicle centre axis (locating aid)
B
Yellow guide line at a distance of approx-
imately 1.0 m from the rear of the vehicle
C
Red guide line at a distance of approximately
0.30 m from the rear of the vehicle
D
Bumper
The guide lines are shown when the transmis-
sion is in position R or when the reverse gear is
engaged.
The distance specifications only apply to
objects that are at ground level.
Driving systems
231
Driving and parking
Z