Mercedes-Benz Sprinter 2019, Operating Instructions Manual

Page: 87 / 298

#
Low beam/perimeter lights: pull back
housing cover 1 .
#
Pull out the socket towards the rear.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
the base of the bulb rests fully against the
base of the socket.
#
Align and insert the socket.
#
Attach housing cover 1 .
#
High beam/daytime running lamps: pull
back housing cover 2 .
#
Turn the socket counter-clockwise and pull it
out.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
the base of the bulb rests fully against the
base of the socket.
#
Insert the socket and turn it clockwise.
#
Attach housing cover 2 .
#
Turn signal: switch off the lighting system.
#
Turn socket 3 counter-clockwise and
remove it.
#
Gently turn the bulb counter-clockwise and
take it out of the socket.
#
Insert the new bulb into the socket and turn it
clockwise.
#
Insert socket 3 and turn it clockwise.
Additional turn signal light
Requirements:
R
Additional turn signal light (all-wheel
drive vehicles): bulb type P 21 W
#
Switching off the lighting system.
#
Unscrew screws 1 and remove lens 2 .
#
Gently turn the bulb counter-clockwise and
take it out of the socket.
#
Insert the new bulb into the socket and turn it
clockwise.
#
Place lens 2 in position and tighten the
screws 1 .
Replacing rear light bulbs (Cargo Van and
Passenger Van)
Overview of rear bulb types (Cargo Van and
Passenger Van)
You can change the following bulbs.
Vehicles with standard tail lamps
1 Brake lights/tail lamps/perimeter lights:
P 21 W
2
Reversing lights: P 21 W
3
License plate lamp: W 5 W
4
Rear fog lights: P 21 W
You can change the following bulbs.
Light and vision 85