Adjusting armrests
Example image
#
To set the armrest inclination: fold the arm‐
rest more than 45 ° upwards
2
.
The armrest is released.
#
Fold the armrest forwards
3
as far as it will
go.
#
Slowly fold the armrest upwards into the
required position.
#
To fold the armrest upwards: if necessary,
fold the armrest more than 90 ° upwards
1
.
Folding the folding seat up or down
&
WARNING Risk of injury when using the
folding seat due to inserted key
When the key is in the lock of the partition
sliding door, it can come into contact with the
person on the folding seat.
#
Always remove the key from the parti‐
tion sliding door before a person sits on
the folding seat.
#
Remove key
1
from the partition sliding
door.
#
Press the push button on catch
2
and fold
seat cushion
3
up or down.
#
Release push button on catch
2
when seat
cushion
3
reaches its end position.
#
Move seat cushion
3
until it has locked. The
push button on catch
2
must be completely
flush with the seat frame.
Installing and removing the rear bench seat
&
WARNING Risk of injury if rear bench
seat is installed incorrectly
If you do not install the rear bench seat as
described, or install an unsuitable rear bench
seat, the seat belts may not provide the inten‐
ded protection.
#
Install the rear bench seat as described
and only in the direction of travel.
#
Installing the rear bench seat in the
opposite direction is not permitted.
#
Use only rear bench seats approved for
your vehicle by Mercedes-Benz.
&
WARNING Risk of injury if the rear bench
seat is not locked in place
If the locking mechanisms on the rear bench
seat legs are not correctly engaged, the rear
bench seat will not be held firmly and could
roll over during travel.
#
Ensure that the rear bench seat is
engaged before setting off. There must
66 Seats and stowage
Summary of Contents for Sprinter 2019
Page 7: ......
Page 19: ...ASpare wheel example 227 At a glance Emergencies and breakdowns 17...
Page 298: ......