Mercedes-Benz Sprinter 2019, Operating Instructions Manual

Page: 51 / 298

#
To unlock: pull locking pin 2 upwards man‐
ually or use the central locking button to
unlock the sliding door (
→
page 44).
#
Press button 1 or pull outside handle 3 .
The sliding door opens or closes.
#
Press button 1 again or pull outside handle
3 .
The sliding door stops moving.
Unlocking the electric sliding door manually
If there has been a malfunction or if the battery
has been disconnected, you can use release
catch 2 to disconnect the sliding door from the
electric motor. Then, you can open or close the
door manually.
#
Vehicles with complete sliding door trim:
remove the cover from release catch 2 .
Service operation is accessible.
#
To disconnect the sliding door from the
electric motor: turn release catch 2 180°
clockwise.
The "MAN" position is set.
#
To unlock: pull locking pin 3 upwards man‐
ually or use the central locking button to
unlock the sliding door (
→
page 44).
#
Press button 1 .
#
Open or close the sliding door with the out‐
side/inside door handle.
#
To connect the sliding door to the electric
motor: turn release catch 2 180° counter-
clockwise.
The "AUTO" position is set.
#
Reset the sliding door ( → page 49).
If it is not possible to rectify the malfunction:
#
Visit a qualified specialist workshop.
Resetting the electric sliding door
Sliding door buttons on the center console
Sliding door button on the door sill (B-pillar)
You must reset the sliding door if there has been
a malfunction or a voltage supply interruption.
Opening and closing 49