Mercedes-Benz S-Class 2011, Operator'S Manual

Page: 382 / 524

Display messages
Hides display messages
G
Warning
All categories of messages contain important information which should be taken note of and,
where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz
Center.
Failure to repair the condition noted may cause damage not covered by the Mercedes-Benz
Limited Warranty, or result in property damage or personal injury.
Display messages appear in the multifunction display.
X
Press the
a
or
%
button on the steering wheel to hide the display message.
The display message is cleared.
The multifunction display shows high-priority display messages in red.
Display messages with a low priority are shown in either yellow or white.
You cannot hide display messages of the highest priority. The multifunction display shows
these messages continuously until the causes for the messages have been remedied.
Certain display messages are accompanied by an audible warning tone or a continuous tone.
Please respond in accordance with the display messages and follow the additional notes in
this Operator's Manual.
When you stop and park the vehicle, please observe the notes on HOLD (
Y
page 335) and
parking (
Y
page 316).
Message memory
The on-board computer saves certain display messages. You can call up the display messages
in the
message memory.
X
Press the
=
or
;
button on the steering wheel to select the Service menu.
If there are display messages, the multifunction display shows, for example,
2 messages
.
X
Press the
9
or
:
button to select the entry, e.g. 2 messages .
X
Confirm with
a
.
X
Press the
9
or
:
button to scroll through the display messages.
When the ignition is switched off, all display messages are deleted apart from some high-
priority display messages. Once the causes of the high-priority display messages have been
rectified, the corresponding display messages are also deleted.
380
Display messages
On-board computer and displays