Mercedes-Benz S-Class 2011, Operator'S Manual

Page: 450 / 524

Example: vehicles with a gasoline engine
Example: vehicles with 4MATIC
X
Pull oil dipstick
:
out of the dipstick guide
tube.
X
Wipe off oil dipstick
:
.
X
Slowly insert oil dipstick
:
into the
dipstick guide tube to the stop, and take it
out again.
The oil level is correct if the level is between
MIN mark
=
and MAX mark
;
.
X
Add oil if necessary.
Checking the oil level using the on-
board computer
On vehicles with a 12-cylinder engine, the oil
level can be checked using the on-board
computer. On all other models, the dipstick
must be used to check the engine oil level.
When checking the oil level:
R
park the vehicle on a level surface.
R
the engine should be switched off for
approximately five minutes if the engine is
at normal operating temperature.
X
Make sure that the SmartKey is in
position
2 in the ignition lock.
X
Press the
;
or
=
button to select the
Service
menu.
X
Press the
:
or
9
button to select
Engine Oil Level .
X
Press
a
.
The
Measuring Engine Oil Level
Accurate Only When Vehicle is
Level message appears in the
multifunction display.
The measurement takes a few seconds. You
will see one of the following messages in the
multifunction display:
R
Engine Oil Level OK
R
Add1.0 l Engine OilAt Next
Refueling
R
Add1.5 l Engine OilAt Next
Refueling
R
Add2.0 l Engine OilAt Next
Refueling
X
Add oil if necessary.
If the engine is at normal operating
temperature and the
ReduceEngine Oil
Level
message appears, the engine oil level
is too high.
X
Have excess oil siphoned off.
! Do not add too much oil. Adding too much
oil can result in damage to the engine or the
catalytic converter. Have excess oil
siphoned off.
If the
For Engine Oil Level Ignition
Must be On
message appears:
X
Turn the SmartKey to position 2 in the
ignition lock.
If the
Need More Time to Check Engine
Oil Level
message appears:
X
If the engine is at normal operating
temperature: repeat the measurement
after about five minutes.
448
Engine compartment
Maintenance and care