Mercedes-Benz S-Class 2011, Operator'S Manual

Page: 268 / 524

To switch back from operation of the rear-
compartment air-conditioning system from
the front:
X
In the climate control main menu, select
Front climate control
and press
W
.
The air conditioning function bar shows the
climate control settings for the driver and
front passenger.
To switch off the rear-compartment air-
conditioning system:
X
In the climate control main menu, select
Rear climate control off and press
W
.
To switch on automatic mode for the rear-
compartment air-conditioning system:
X
In the climate control main menu, select
Rear automatic
and press
W
.
Automatic mode for the rear-compartment
air-conditioning system is switched on.
Seats
Lumbar supports
The lumbar support in the backrest of the
driver's and front-passenger seats can be
adjusted to provide optimum support for your
back.
X
To select the seat: press the
T
function button.
The main area of the COMAND display is
active. A scale appears.
X
To move to the lower menu bar: select
by sliding
ZV Æ
the COMAND controller
and press
W
to confirm.
i When you press the
T
function button,
the previously adjusted seat is active.
X
To adjust the lumbar support: select by
sliding
XVY
or turning
cVd
the COMAND
controller and press
W
to confirm.
Multicontour seat
i Information about the components and
operating principles of COMAND can be
found on (
Y
page 116).
The contour of the driver's seat and front-
passenger seat backrests can be individually
adjusted to provide optimum support for your
back. This is achieved by controlling the
pressure in the air chambers in the
multicontour seat.
The adjustments are made using the
COMAND display.
i When you adjust the multicontour seat,
you may hear the air being pumped in or
released.
You can adjust the following air cushions:
R
seat side bolsters
R
seat backrest side bolsters
R
backrest curvature in the lumbar region
R
backrest curvature in the upper back
region
X
Make sure that the key is in position
2 in
the ignition lock.
X
Press the
T
function button.
Selecting the seat
You must first select the seat for which you
wish to make adjustments.
X
Press the
T
function button.
The main area is active.
X
To move to the lower menu bar: select
by sliding
ZV Æ
the COMAND controller
and press
W
to confirm.
266
Vehicle
COMAND